| A mechatronic partnership with the CETIM.... | 04 April 2010 |
In this issue dedicated to “Les Rendez-vous Carnot”, the Impact Innovation magazine highlights the partnership between CEDRAT TECHNOLOGIES and the CETIM in the AVIBUS R&D project (Drilling with Vibration Assistance by Piezoelectric Actuators). Seeing interest in this project, the CETIM accepted in 2009 the proposal of CEDRAT TECHNOLOGIES to become a member. Ugo Masciantonio, project engineer for the CETIM, comes back on this fruitful partnership and underlines the efficiency of CEDRAT TECHNOLOGIES to assume the overall management of the project and its technical commitments. See press release... |
 |
| Powerful Features for Portunus 3.2 | 19 June 2009 |
"Bodo's Power" magazine comes back on the new powerful features of Portunus 3.2, the unique multi-domain system simulation software... See press release... |
 |
| CEDRAT TECHNOLOGIES member of the cluster OPTITEC ! | 26 February 2009 |
"Optics & Laser Europe" magazine comes back on OPTITEC-POPSud cluster which is active in sectors such as space, energy, marine, health...CEDRAT TECHNOLOGIES is member of the CELTIC project through this cluster. See press release... |
 |
| Our technology is mentioned in the press! | 18 November 2008 |
CEDRAT TECHNOLOGIES' Stepping piezo actuators is mentioned in the press after having received the 2008 Golden Micron. Press release from the magazine "Présences"
|
 |
| Solutions adapted to an ever increasing electrical and mechatronic world | 07 October 2008 |
Equip' Prod magazine presents three innovative products developed by CEDRAT TECHNOLOGIES : the APA150XXS, the Servo Piezo Tool (SPT) and the motor SPA (MICRONORA 2008 Golden Micron). See press release... |
 |
| MICRONORA 2008 Golden Micron for CEDRAT TECHNOLOGIES' Stepping Piezo Actuators! | 26 September 2008 |
With the Golden Microns, MICRONORA rewards the microtechnological innovations. CEDRAT TECHNOLOGIES is proud to be among the winners 2008 thanks to its SPA. More information available in french and english on the official website of MICRONORA. |
 |
| Integrated tools for electrical engineering | 10 September 2008 |
In this article, the magazine "Economy Tribune" presents briefly the two main activities of CEDRAT Group: mechatronics products & systems and software solutions. See press release... |
 |
| Magnetic radiation of low frequency installations | 09 September 2008 |
PULSE, the Manitoba HVDC research centre journal, comes back on the improvements and new measurements obtained thanks to Flux's simulation. See press release... |
 |
| CIVAnde : a software totally dedicated to NDE | 01 July 2008 |
CIVAnde is a unique software platform dedicated to Non Destructive Evaluation (NDE)modelling in three major techniques: Ultrasonic Testing (UT), Radiographic Testing(RT) and Eddy Current Testing (ET). In its magazine of June 2008, the CEA comes back on this software's capacities. |
 |
| Piezo actuators to vibrate the sand of Mars ! | 30 June 2008 |
The NASA Goddart Space Flight Center (GSFC) just starts to publish the details of the next rover to be sent on Mars end of 2009: CEDRAT TECHNOLOGIES has delivered the flight units (Amplified Piezo Actuators already qualified under French Space Agency (CNES) contracts) to GSFC by Mid 2007. The SAM instrument is now ready for flight and is being delivered to NASA/JPL by Mid 2008. The purpose of the piezoelectric actuator is to vibrate the Solid Sample Inlet Tube, between each analysis to clean it. To know more : http://ael.gsfc.nasa.gov/marsReferences.shtml See press release...
|
 |
| Tools for Simulating Mechatronics | 30 June 2008 |
CEDRAT, partner of the O2M project (future mechatronics modelling and simulation tools), is working to make design tools solving mechatronics' challenge ! See press release... |
 |
| Radiated fields of electrical equipments | 29 April 2008 |
Magnews, the International publication of the UK Magnetics Society, comes back on our flagship software solution Flux, which enables the rapide and precise radiated fields prediction of many devices. See press release...
|
 |
| Rotor research by ONERA ! | 29 February 2008 |
ONERA is working on the development of a rotor with active-control blades and our piezo-electric actuators are contributing to this major technological breakthrough ! See press release...
|
 |
| The CEDRAT Group member of the SurgiMag project ! | 22 February 2008 |
The aim of the SurgiMag project is to build a miniature computer-assisted surgery station. The CEDRAT Group, member of this project, offers its know-how. See press release... |
 |
| The new book "Adaptronics and Smart Structures... | 19 February 2008 |
... Basics, Materials, Design and Applications", Editor Pr. Harmut Janocha CEDRAT Group contributed to 2 chapters:
...that performs the worldwide state of the art in the active materials technology, proposed by CEDRAT Group in its mechatronics engineering activity.
|
 |
| InCa3D's assets by Schneider Electric ! | 08 February 2008 |
Schneider Electric comes back on the pros of InCa3D, designed to model electrical connections within applications dedicated to electronics and engineering power. See press release... |
 |
| When SERVOTRONIC speaks about our piezo actuators ! | 07 February 2008 |
Our Belgian distributor, SERVOTRONIC, talks up CEDRAT Group's technology in "Technische Revue on line". See press release...
|
 |
| InCa3D: both powerful PEEC solver and advanced Graphical User Interface ! | 10 January 2008 |
InCa3D stands out from the numerous tools proposed to power electronics designers by enabling the fast modelling of parasitics in interconnections. See press release... |
 |